Blog - Page 3 of 12 - CAPS

Book now

By submitting this request, you agree to our Terms and that you have read our Data Use Policy.

Please leave this field empty.

Book a service

Contact us now

By submitting this request, you agree to our Terms and that you have read our Data Use Policy.

Please leave this field empty.

Request a quote

Case Study: Reedy Creek Gas Power Plan

Posted on 23rd October 2017 in

Clarke Energy was appointed to build a power station in Central Queensland for a coal seam gas plant. In order to back up their power station, they required two generators to act as a prime power source during the construction of the station (which consisted of 10 x 3 MW gas engine generators sets once…

Come See Us At Wine Eng 2017!

Posted on 5th September 2017 in

Winery Engineering Association National Conference and Exhibition From Wednesday, September 6th to Thursday 7th September, you can experience the spectacle of presentations and a great display of products & services by Australian and International suppliers to the wine and beverage industries. Required for nearly every stage of the bottling process, compressed nitrogen is a vital…

Case Study: Cairns Base Hospital

Posted on 2nd September 2017 in

OBJECTIVES Complete design and manufacture in compliance with Australian standards for emergency power supplies in hospitals. A N+1 power solution equipped with a strong control detection system that quickly swings generators into action. A maximum noise level of 85 dB(A) @ 1m. An emission regulated engine to meet the hospital’s environmental goals. Fuel capacity to…

Cordless Precision Bolting Now A Reality

Posted on 24th August 2017 in

Ingersoll Rand has taken their QX series of programmable, precision tools to the next level with the development of the QX Series 20v Cordless Torque Multiplier. If torque accuracy and traceability of bolts are critical to your industry then this tool will have the answers to all your needs! Ingersoll Rand’s primary focus when they developed…

Case Study: Presson Descon International (Pvt) Limited (PDIL)

Posted on 21st August 2017 in

Presson Descon International (Pvt) Limited (PDIL) is an integrated engineering, procurement, construction and commissioning (EPCC) company, specialising in seamless services for supply and set up of production and processing equipment, facilities and their related utilities on a turnkey basis. OBJECTIVES The primary objective is to produce pipeline quality gas on Low-Pressure Gas and condensate from…

See You At The Energy Efficiency Expo (Adelaide) 2017!

Posted on 7th August 2017 in

CAPS Australia is proud to be attending The Energy Efficiency Expo and Seminar at the Adelaide Convention Centre on Wednesday 9 August 2017.  Energy costs are a key challenge for businesses today, even more so for those who utilise compressed air. Approximately 15% of a business’s total energy usage derives from compressed air, and a…

Case Study: Barangaroo South, Sydney NSW

Posted on 3rd August 2017 in

The contract, conceivably the most significant in CAPS’ 38 year history, was recently finalised. This was CAPS’ second time working with project developer, Lend Lease, following a successful bid for the installation of two 2,000 kVA generator sets into Sydney’s MidCity during its construction in 2009. REQUIREMENT Lend Lease’s latest development, Barangaroo South, is a…

Case Study: CV Tool & Engineering Co.

Posted on 13th July 2017 in

CV Tool and Engineering Co (CV Tool) is a specialist service engineering company located in Dandenong South, Victoria. OBJECTIVES Nitrogen gas is widely used to blanket precision laser cutting as its inert properties prevent oxidisation of the cut edge while the gas pressure ensures a clean cut without any residual material sticking to the underside….

Case Study: PROCAL – A Milk and Dairy Manufacturer

Posted on 22nd June 2017 in

Procal is a family owned fresh milk and dairy manufacturer. Their milk is sourced from local farms and produced in a state of the art facility in Melbourne. OBJECTIVES In yoghurt packaging, gas is often applied to the vapour space of the containers in order to control their composition. This process, called blanketing, greatly improves process…

Case Study: Domestic Offshore Oil Platform

Posted on 5th June 2017 in

The customer involved in this project is an oil and gas exploration and production company with operations in the United States, Canada, Egypt, the United Kingdom North Sea, Australia, and Argentina. CHALLENGE This customer owned a set of dryers on an offshore oil platform that had been subjected to highly corrosive natural and man-made environments. This…