Airman Power Generators Australia

Book now

By submitting this request, you agree to our Terms and that you have read our Data Use Policy.

Please leave this field empty.

Book a service

Contact us now

By submitting this request, you agree to our Terms and that you have read our Data Use Policy.

Please leave this field empty.

Request a quote

Airman Power Generators Australia

Airman Mine Spec, Plug & Play Backup Generators

Description

EXCEPTIONAL PRODUCTIVITY.
  • STANDARD: 18 HOURS RUNTIME @ 75% LOAD (pn: SDG25S-3B1N)
  • ENVIRONMENTAL: 40 HOURS RUNTIME @ 75% LOAD (pn: SDG25S-7B1N)

CAPS offer both the Airman standard range of generators and a near “mine spec” Environmental range. Both ranges feature:

  • Automatic Air Bleeding System
  • Low Noise Level (with low noise engines fully equipped with highly attenuated muffler & exhaust system design)
  • Easy maintenance (inspections can be done by simply opening the right side door)
  • All generators are backed by our Australia wide network of service branches and extensive local aftersales support.
For further information, our friendly team are happy to assist! Contact us by sending an email below or call us at the number provided. 

Features
  • ENGINE STARTING EFFICIENCY
    An engine preheating system consisting of a quick heating glow plug to easily start up engine in low temperature conditions.
  • ALL WEATHER CONSTRUCTION
    A specially designed air inlet port that reduces internal pressure and an insert type seal on the doors work together to prevent rain water penetration.
  • SIMPLE OPERATION
    Analog control panel equipped with all the features you require to run and take care of your generator. Also features a cable terminal box to easily connect to a distribution board.
  • AVR ALTERNATOR
    Protecting all your sensitive appliances from voltage variation.
  • AUTOMATIC AIR BLEEDING SYSTEM
    Automatically bleeds air from the fuel line system. This eliminates the need to prime the fuel system again should the generator be shutdown due to running out of fuel.
  • ELECTRONIC ENGINE GOVERNOR
    Easily measure and regulate the speed of the engine via a convenient switch.
  • BETTER GENERATING PERFORMANCE
    Coupled to a low transient reactance alternator and reinforced damper coil. This increases the negative-phase-sequence current capability and minimises the output waveform distortion.
  • Experience the difference with CAPS’ expert industrial equipment servicing. 
Specs
Power 10.5 – 50 kVA
Fuel Type Diesel
Voltage 50Hz : 400V or 415V
Speed

1,500 rpm

Phases

3-Phase, 4-Wire

Output

11.5 – 300 kW

Fuel Tank

58 – 400 Litres

Type

Swirl Chamber (11.5 – 19kW) / 
Direct Injection, Turbo Charged (38 – 48kW)

Motor

Kubota (SDG13S, SDG25S, SDG45S)
Isuzu (SDG60S)

 

 

Continuous Operation (Standard / Environmental) (hrs)

32 / 24 – 67 / 47 hours

Sound Level (dBA @ 7m at no load)

56 – 59 dBA

Dimensions (mm)

Minimum: L 1,480 x 650 x 950
Maximum: L 1,630 x 1,290 x 1,650

 

Options
  • Mine Spec
  • High dust filtration
  • Fire extinguisher
  • Lockable battery isolator
  • Lockable starter motor isolator
  • Safety release radiator cap
  • 12v jump start
  • Trailered options
  • Environmental containment bases
  • Custom graphics and safety labels
  • 12v DC flashing light
  • Externally mounted single and three phase IP65 rated switched sockets
  • Environmental Option
    • The Airman Environmental range provides a much longer continuous operation than you would ever expect without having to refill, all in a portable and easily transportable package.
    • Large capacity fuel tank equipped under the base frame as standard (fully bunded), allowing for continuous operation without an auxiliary fuel tank with several days of operation possible without a refill.
    • Up to 40 hour run times possible between refills on some models.
    • In the case of any water, oil or fuel spillage of over 50% of the bund capacity, a safety sensor will turn on a warning lamp on the control panel.
Brochure Enquire
Book a service
Request a quote
Book a service
Request a quote