Miners Pack

Every single miners pack goes through a two hour factory acceptance test in our state-of-the-art test bay, be it in a 415V or 1000V configuration.

ENQUIRE NOW
Description
Specifications
Options
Description
THE PREMIUM HARDWARE USED IN OUR ASSEMBLIES TO DELIVER OUR MINERS PACK CONSIST OF:
  • INGERSOLL RAND air compressor (M160KT) modified to comply with typical mine regulations.
  • Standard operation at 415/3/50Hz or optionally configured for 1,000V/3/50Hz power supply.
  • A generous CAPS 2,400L air receiver, fabricated to the latest AS1210 standard inclusive of statutory design documentation and Manufacturer’s Data Report (MDR).
  • Package includes all pressure safety valves with AS1271 test certificate, pressure gauge, discharge isolation valve and auto-drains on all condensate lines.
  • Skid frame and roof fully welded to a high quality fabrication standard, complete with accompanying Manufacturer’s Data Report (MDR).
Specifications
Capacity 26m3/m (918cfm) to 54m3/m (1,907cfm)
Pressure 7 bar to 14 bar (100psi to 203psi)
Voltage 415V or 1,000V

 

Options
THE OPTIONS THAT CAN BE FITTED TO THE MINERS SKID INCLUDE:
  • Operation at 415V/3/50Hz or conversion to 1,000V/3/50Hz
  • High dust filtration
  • IP65 marine window on compressor control panel
  • Reinforced earthing
  • Residual current breaker with over-current on control circuit.
  • Isolator switch
  • Automatic Detection Fire Suppression system with

Enquiry form

General Enquiry

Book a Service

Quote a Request

Rental Enquiry